Water & Sewer

Superintendent

Hardy Jackson
tel: (843)774-0047
fax: (843)774-0048
hjdillon@bellsouth.net

Lab Director

Tammy Jackson
tel: (843)774-0047
fax: (843)774-0058
tsjdillon@bellsouth.net

City of Dillon
2015 Consumer Confidence Report (CCR)
System # 1710001
May 10, 2016

We're pleased to present to you this year's Consumer Confidence Report. This report is designed to inform you about the quality water and services we deliver to you every day. Our constant goal is to provide you with a safe and dependable supply of drinking water. We want you to understand the efforts we make to continually improve the water treatment process and to protect our water resources. We are committed to ensuring the quality of your water. We ask that all our customers help us protect our water sources, which are the heart of our community, our way of life and our children’s future.

CITY OF DILLON EXCEEDS ALL WATER QUALITY U.S STANDARDS: In order to ensure that tap water is safe to drink, the United States Environmental Protection Agency (EPA) and South Carolina Department of health and Environmnmetal Control (DHEC) prescribes strict regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water  which must provide the same protection for public health. The amounts of these contaminants are measured by DHEC and are reported in the following table. The few contaminants that were detected in our water are present at very low concentrations and in all cases are much less than the amounts considered unsafe by the EPA. MCL’s are set at very stringent levels. To understand the possible health effects described for many regulated constituents, a person would have to drink 2 liters of water every day at the MCL level for a lifetime to have a one-in-a-million chance of having the described health effect.

SOURCES OF DRINKING WATER: The sources of drinking water (both tap and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs and wells. As water travels over the surface of the land or through the ground, it dissolves naturally – occurring minerals and , in some cases, radioactive material, and can pickup substances resulting from the presence of animals or from human activity. All drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants.  The presence of contaminants does not necessarily indicate that the water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental protection Ageny’s Safe Drinking Water Hotline at (800) 426-4791.

CONTAMINANTS THAT MAY BE PRESENT IN WATER INCLUDE:  Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.  Inorganic contaminants, such as salts and metals, which can be naturally –occuring or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.  Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses. Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems. Radioactive contaminants, which can be naturally occurring or be the result of oil and gas production and mining activities.

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by cryptosporidium and other microbiological contaminants are available from the Safe Drinking Water Hotline (800-426-4791). 

YOUR DRINKING WATER SOURCE:  The City of Dillon Water system pumps ground water from 5 wells that draw off the Middendorf aquifer.

LEAD INFORMATION:   If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. The City of Dillon is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your drinking water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.  

City of Dillon Water System

Water Quality Information
Analysis for January 1 – December 31, 2015

Contaminant

Date Sampled

Detected Levels

 

MCL

 

MCLG

POSSIBLE SOURCE

REGULATED AT THE TREATMENT PLANT

 

Barium

 

 

07/30/2014

 

0.064

Range = 0.053 - 0.064

 

2.0 ppm

 

2.0 ppm

Discharge of   drilling wastes; Discharge from metal refineries; Erosion of natural   deposits.

 

Fluoride

 

 

07/30/2014

 

1.3

Range = 0.79 – 1.3

 

4.0 ppm

 

4.0 ppm

Erosion of   natural deposits; Water additive which promotes strong teeth; Discharge

from fertilizer   and aluminum factories.

 

Ethylbenzene

 

 

08/03/2015

 

0.00112

Range = ND - 0.00112

 

700 ppb

 

700 ppb

 

Discharge from   petroleum refineries

 

Total Xylenes

 

 

08/03/2015

0.0086

Range = ND – 0.0086

 

10 ppm

 

10 ppm

Discharge from petroleum   factories; discharge from chemical factories

 

RADIOACTIVE CONTAMINANTS

 

Gross Alpha   Excluding Radon and Uranium

 

 

07/30/2014

 

3.8

Range = 0.0 – 3.8

 

 

15 pCi/L

 

0 pCi/L

 

Erosion of   Natural Deposits.

 EPA’s MCL for fluoride is 4 ppm. However our state has set a lower MCL to better protect human health.

REGULATED AT THE CUSTOMER’S TAP

 

Copper

 

2013

 

 

90th % = 0.67

0 > AL

 

AL=1.3 ppm

 

1.3 ppm

Erosion of   natural deposits; Leaching from wood preservatives; Corrosion of household   plumbing systems

 

Lead

 

 

2013

 

90th % = 0.0

0 > AL

 

AL = 15 ppm

 

 

0 ppm

 

Corrosion of  household plumbing systems; Erosion of  natural deposits.

REGULATED AT THE DISTRIBUTION SYSTEM

 

Chlorine

 

 

2015

 

0.66

Range = 0.58 – 0.66

 

MRDL

4 ppm

 

MRDLG

4 ppm

 

Water additive   used to control microbes.

 

*Some   analysis are not performed every year. The most recent analysis performed   will be the one reported.

          
ANALYSIS SUMMARY:  As you can see by the table, our system had no violations. We’re proud that your drinking water meets or exceeds all Federal and State requirements. We have learned through our monitoring and testing that some constituents have been detected. The EPA has determined that your water IS SAFE at these levels.        

INTERPRETING THIS DATA: To help you better understand the terms and abbreviations used in the previous table, we've provided the following definitions.

Maximum Contaminant Level Goal (MCLG) - The “Goal”(MCLG) is the level of a contaminant in drinking water below which there is no known or expected risk to health.  MCLGs allow for a margin of safety.

Maximum Contaminant Level (MCL) - The “Maximum Allowed” (MCL) is the highest level of a contaminant that is allowed in drinking water.  MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

Maximum Residual Disinfectant Level Goal (MRDLG) – The level of a drinking water disinfectant below which there is no known or expected risk to health.  MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

Maximum Residual Disinfectant Level (MRDL) – The highest level of a disinfectant allowed in drinking water.  There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Average (Avg) – Regulatory compliance with some MCLs are based on running annual average of monthly samples

Non-Detects (ND) - laboratory analysis indicates that the constituent is not present.

Parts per million (ppm) or Milligrams per liter (mg/l) -  or one ounce in 7,350 gallons of water.

Parts per billion (ppb) or Micrograms per liter – one part per billion corresponds to one minute in 2,000 years, or a single penny in $10,000,000.

Action Level - the concentration of a contaminant that, if exceeded, triggers treatment or other requirements that a water system must follow.

Picocuries per Liter (pCi/L) – a measure of the radiaoactivity in water

CONSUMER SUGGESTIONS:  If you have any questions or concerns about the CCR or you want to learn more about our water system and the drinking water treatment process, please contact Tammy Jackson (City of Dillon Lab Director) at (843) 774-0048 between 8:00a.m. – 5:00p.m. Monday – Friday.Please attend any of our regularly scheduled meetings which are held on the second Monday of each month at 7:00p.m. in the City County Complex Courtroom.       

        
CCR AVAILABILITY:  This report will not be mailed unless specifically requested. To request a copy, please  call Tammy at (843) 774-0048. Copies of this report have been posted at the Dillon City/County Complex, Dillon County Courthouse, Dillon County Library, City of Dillon Facebook page, and on the City of Dillon website at http://71.6.170.26/revize/dillon/departments/water_and_sewer.php (click on 2015 Consumer Confidence Report(CCR)-Link).

Este informe contiene informacio��n muy importante sobre el aqua que usted bebe. Tradu��zcalo o�� bable con alquien que lo entienda bien.

Tammy S. Jackson

Lab Director

“The City of Dillon 2015 Annual Water Quality Report is now available. This report contains important information about the source and quality of your drinking water. This report is designed to inform you of the quality of water we delivered to you over the past year. Our goal is to provide you a safe and dependable supply of drinking water. Please go to 2015 Consumer Confidence Report (CCR)-Link above to view the Report and learn more about your drinking water. If you do not have internet access and would like a paper copy of your Report, please call Tammy Jackson at (843)774-0048.”

Our Recommended Links

Contact Information

Office Location & Mailing Address
1700 E. Main Street
Dillon, SC 29536

Office Hours
Monday - Friday:   8:00am to 5:00pm

Contact Numbers

tel: (843)774-0047

fax: (843)774-0048
tsjdillon@bellsouth.net